The Cambs Glass walk on glass rooflight incorporates a bespoke thermally broken in-house designed aluminium perimeter framework which is designed to sit over a pre-manufactured builders work upstand with should incorporated a fall of 1⁰, thus creating uninterrupted views and maximising the natural daylight to the room below. The framework is supplied in a hardwearing and low maintenance dual colour polyester powder coated finish (RAL 7015 external, and RAL 9010 internal), and is installed with a high specification double glazed unit incorporating warm edge spacers and low e glass. The glass unit it is factory bonded into the frame, all to create a flush silicone filled external surface free from any water or dirt traps.
Our rooflights are designed to accommodate a normal domestic floor load of 1.8kN/m2 UDL and a 1.4kN point load, we are able to accept other floor loads but please check with our office first.
Our rooflights are supplied with full installation instructions and hardware kit to allow installation for any person with practical DIY skills.
Some of the Benefits of Cambs Glass Walk on Rooflight
Glass U-Valve [W/(m2K)] Ug = 1.1
Light Transmittance = 75%
Design and Manufactured In the UK
Bespoke Shapes and sizes available
Pre Glazed for easy diy Installation